Showing posts with label 450sx vh45de vh45 s13. Show all posts
Showing posts with label 450sx vh45de vh45 s13. Show all posts

Thursday, October 27, 2011

Wish list?

Is it too early to be starting a wish list for over the winter/tax returns??

I think not.

Number 1 on my list:

Ikeya Formula inner tie rods.  I just bought new s14 replacement stuff last winter and they were first too long with stock control arms.  Now they aren't long enough with my extended control arms and the inners don't have enough thread engagement to put my 7mm spacers on.  Facepalm.  Solution is below.






These would also be nice but not necessary:

Ikeya Formula tie rod ends.




Number 2 on the list:    A BUCKET SEAT!!! FINALLY!!!!     Now whether these will happen or not.... no idea.

Wednesday, October 26, 2011

Few pics of the car - Door Bar Update.

Went out and took a few pictures of the car on the ground all "cleaned up"

I will also leave you with an in-car video of the last event  and one i found of me getting the monster can!.  Donate tires to me please?  My fronts are bad and am out of rears pretty much!

Pics:





Video:







ALSO!
Also added some door bars to my Auto Power bolt in cage i acquired a while ago.  I made the connections exactly as Auto Power appeared to make them, 1.5 x .125 DOM inside of 1.75 x .120 DOM with 4 inches of overlap and a Grade 8 fastener and self-locking nut.  Base plates are made out of 1/4 inch plate (both sides).   I wanted to keep it bolt-in so i can sell it later as a tandem legal bolt in cage.  (Tandem legal depending on what events you go to.)  

Got a steering wheel for a decent price a while ago as well.  Momo Mod 08 with an NRG short hub.  All i need is some seats!




Sunday, October 16, 2011

Control Arms - Car on the ground

So i did some work today and washed the car, cut the hood to clear the radiator as I re-secured it and the cap hit it again.  Also stripped the entire car of every sticker except the team sticker (Opposite Grip) and my buddy's shop (www.Renown-Performance.com).  I must say, the car looks much classier without all the gaudy stickers, even with destroyed fenders, hah.

But as you can see.. the front has about 7 degrees of camber at the moment.  I had to raise the car three turns in order to stop rolling rubber off on the metal fenders in half-dollar sized balls (literally), although it still rubs because as it turns out lengthening your control arm also lowers you car.  The moment arm is lengthened and therefore your spring is easier to compress due to the steeper angle between the top hat and lower balljoint.  This thing was low as crap! I already pulled the fenders a LOT, and need to pull more or man up and actually buy something fiberglass other than sideskirts.  Currently i am stuck at this much camber until i can make the fenders wider.  I am aiming for about 5 degrees.

Looks like my wheel bearing shot itself huh.  lol

Thursday, October 13, 2011

Control Arms

Hey look, I did something to my car.

Decided to get nasty in the camber area.  Will post more pics of them on the car later and after i align the thing.  I'm expecting to get approximately 5 degrees with these puppies and maybe a little better contact patch at full lock too.  Also, might be awesometron knuckle time and maybe attempt at some ackerman adjustments at the same time..

Ended up putting some polyurethane bushings in these as well.  I've had an energy suspension master kit lying around for years and I'm slowly upgrading haha.

Before


During




After

Sunday, September 25, 2011

Drift Event Oct. 2nd - Thunderdome - Sturgis, SD

I suck at updating this blog... ha.  But guess what, last drift event of the SD-Drift season is next week (October 2nd) at the Thunderdome in Sturgis, SD; it's right across the street from the Full Throttle Saloon in Sturgis.  Be there!  It's an absolute blast to watch/participate in.

Driving starts at 9am and we go till 5pm.
Spectators - FREE
Drivers - $60 - cap of 25 drivers - Prepay is NOT mandatory this time. You can pay all the way up until October 2nd.

Need more info?  Get at me!

Photo via FOTOmotive dudes.
http://www.facebook.com/FOTOmotive

Full set.
http://www.facebook.com/media/set/?set=a.244883882224653.57919.192098390836536&type=1



Oh yeah, this is cool too.  Nice photo synopsis of the last event at the Thunderdome.



And i suppose here's another video of the first event at the Thunderdome while I'm at it.

Tuesday, June 21, 2011

SD Drift Event At Kick Start/Monkey Rock

SO just this past Sunday we (SDDA) had our second event of the summer. It was at the Monkey Rock/Kick Start in Sturgis, SD.  The location was AWESOME as we could get some serious long sliding/early entry going on. Here's one video I've uploaded of the 6 hour event.  It was an absolute blast even though the weather (rain) was off and on all day.  I'll update this here with more pictures and video as they come up!

Photo From:

http://www.flickr.com/photos/nuggetjr/









Saturday, June 18, 2011

First Drift event in MN

It's kind of strange that I finally got to drift with people on D-Town for the first time last weekend; the drift forum I've belonged to the longest, bought this car off of, started my first build on, and even went and hung out at some drift events YEARS ago. Needless to say it was a GREAT time for me, and about time too. It was my first time at a real track as all we have out in good ole SD is parking lot events. Don't get me wrong those are fun as well because you can switch up the track layout constantly.. but the event at Elko Speedway in Elko, MN last weekend was one of the most fun events I've done.

That 3rd gear bank had me nervous all day as I hadn't driven my car at an event in nearly 10 or 11 months... it took me a couple runs on the inner oval to get re-acquainted with my car. I spun out all over the place the first run and looked like a moron. Next couple runs were a lot better but I still think i could have done better. When I finally decided to take on the bank, it was on. That bank is so much fun, first time doing 3rd gear for me and man it was fun. I cannot wait to go back there again! On with the media.

Pics from Erik Lauritsen

http://www.facebook.com/media/set/?set=a.511217232360.8060.294900394&closeTheater=1

From Jmuag.

http://www.flickr.com/photos/54306394@N07/

http://jmuagproduction.blogspot.com/






From:  Kaizo Photo

http://www.kaizophoto.com/





From:  Khilgers

www.khilgers.com






From: Angled Lines

www.angledlines.com







VIDEO

Event video




Inner Bank, Second Run




Outer Bank 1st Run

1st attempt at 3rd gear ever.  Was feeling out the bank for the first few corners until i got comfortable. Waaaaaay too much fun.



Outer Bank 1st Run GoPro

Friday, May 20, 2011

Drifting video from 2010

Drift event is coming up this weekend (Sunday to be exact), hopefully i can get someone to lend me their car so i can go drifting!

Video from last years events:

Thursday, December 16, 2010

Minnesota.......

Here i come.  Got it all loaded up today, will leave early in the morning!  I'm anticipating this drive to most definitely suck, bad!  I ended having to raise the car a LOT to get it on the trailer.

Sunday, December 12, 2010

Off Season

Ah, the boring off season.  I've been itching to go out and mess around lately but haven't been able to.  School work has literally consumed my life this past month or so.  It's coming close to the end finally!  This coming week is finals week so after that it's off to Minnesota for my break to hang out with the friends and family i love and hardly get to see.

Also check this, i remember when i used to go out and do this stuff.  I miss it!!!


Fun in the Snow from Angled Lines on Vimeo.


MINNESOTA I MISS YOU

Thursday, November 4, 2010

A REAL alignment?

Got hooked up with an alignment at Western Dakota Tech!


Nice brand new alignment machine..  and hey guess what,  It works AWESOME!  One that actually takes into account different offsets.  Or maybe it's just the people using it know what they're doing haha.  Was pretty sweet getting in and doing the alignment with them. It was especially nice being to see all the changes on a screen instead of doing it all by hand with strings, a vernier calipers, and a calculator!

Was suprised i actually got the on the machine. The exhaust was hitting the jacks in the center of the lift and to jack up the car with a tranny jack so we could move them.  Now for pictures.





I think my phone's camera lens is messed up as all of these pictures look like garbage.  v Especially this one...
These are the ramps we made to get the car up on the lift.

Thursday, October 28, 2010

Event Media

Event was super fun. Started out being cold and wet as it was raining off and on throughout most of the day. Eventually towards the end it dried out quite nicely and thats when the REAL fun began. Here's some video's and pictures from the day.













Monday, October 18, 2010

WDT 2

Well it's about that time again!  In less than a week there is another even tbeing held at Western Dakota Tech here in Rapid City, SD.  I sure hope to see a larger turn out than last time! We've got prizes!

Anyways, here's some more pictures/footage of yours truly from last event.